This is also treading along as unsupported but if you want to get your hands dirty it is an EXTREMELY good learning experience.In Disk Utility on your Mac, format disks or volumes using Apple File System (APFS). However, have you tried a fully UEFI Windows 10 install? Your update does not detail very much so it is important to possibly include pics since command line output will be limited preinstall. You may also be preparing the drive for use as, say, a storage device for a media player or to record TV programmes on a TV with a USB port.Most people are going to assume that you are going the boot camp route. The main reason for formatting a USB drive as Fat32 on a Mac is that you want to be able to use the drive on a Windows PC, as well as a Mac perhaps to transfer files between the two machines.The bootloader should detect a Windows USB disk. I believe you have done this, so it should be ok.Create a USB install of Windows 10 that is UEFI compatible.Insert the USB drive and hold down option. GPT is a disklabel not a formatting type.Most people will tell you to go the boot camp route, but I've found that the UEFI method results in MUCH quicker boot time. Format the drive/create partitions, allow install to finish.Reboot and let the installer finish the windows install.Lots of info is available. Again it is dependentSelect the disk available. You mayNeed to have a windows equivalent driver that you load via theInstaller to ensure your hardware is supported. Any errors would be helpful.If you are able to get into the Windows install prompt, then you mayRun into issues with the installer detecting the hard drive. If your macbook does not boot into the windows install screen, then you need to figureOut why it can't load.
Formatting Ssd And Windows 2018 Download And InstallThen press the button with three dots (.) and select your Windows ISO image (assuming you already have one). Select ISO option from the dropdown menu next to Disk Image text if it is not already selected. Then run it and select Disk Image option on the screen. Skip to step 2 if you already have an installation media.Step 1: Download and install unetbootin from here. You have been warned.You need a USB formatted as FAT32 with at least 8 GBs of free space. It assumes you already have macOS installed and have a Windows ISO in hand.Before continuing, make sure that you have a backup of your data! I am not responsible for any damage caused by this guide.Select the target as your desktop and continue.Step 3: Once your bootcamp software is downloaded and unetbootin is done, copy the WindowsSupport folder to your USB's root directory.Step 4: It's time to begin the installation! Reboot your MacBook and when it's powering on, press and hold Alt (option) key on your keyboard. This will download Bootcamp helper. Once it's opened, select Action > Download Windows Helper Software. You can understand which one is your USB by searching for your USB's label.Step 2: Now open up the Bootcamp assistant for the last time. Your USB is something like /dev/disk1s1 or /dev/disk1s2 (but definitely not /dev/disk0). This will burn the ISO image to the USB.Step 1.1: To learn what your USB is called, open up a Terminal from Spotlight and type: diskutil listThis will show you all of the drives connected to your computer. There, you can browse the pen and select the Apple SSD driver (I don't remember what is the exact folder you have to select, but it's not hard to find out).Once the driver is installed, you can finally see your hard drive partitions. Hence, insert the Boot Camp drivers USB pen and press Load drivers. You'll be asked to chose the drive where to install Windows to, but you probably won't see any storage device. Media reader for mac osThat will install all the needed drivers (network, keyboard and touch-pad. Once Windows is booted, run the setup.exe executable in the Boot Camp USB pen.
0 Comments
Leave a Reply. |
AuthorKathleen ArchivesCategories |